Products Description
Quick change strip disc is a grinding tool made of high-quality silicon carbide or aluminum oxide. Its working principle is based on the strip design, which enables the grinding disc to form a wider contact with the workpiece surface when rotating, and effectively removes defects and unevenness on the material surface through the friction generated by high-speed rotation.
Product Specification
Product Features
Quick-change Design
The quick change strip disc adopts a modular snap-on connection structure. It consists of an engineering plastic card block and a metal card slot. The card block and the grinding disc are integrally formed, and the card slot is installed on the device. When replacing, press the unlock button, the card block will be detached from the card slot, and the removal only takes 1 minute; when installing, just align the card slot and push it, which also only takes 1 minute.
Waterproof Performance
The surface of the quick change strip disc is coated with polytetrafluoroethylene (PTFE), which has low surface energy and a water molecule contact angle of more than 110°, effectively preventing water penetration.
High-precision Processing
The diameter tolerance of the quick change strip disc is within ±0.03mm, the thickness tolerance is within ±0.02mm, and the flatness error does not exceed 0.01mm.
Product Application
Food Processing Industry
Quick change strip disc can grind raw materials such as grains and beans into fine powder.
Ore Mining And Mineral Processing Field
In the field of ore mining and mineral processing, quick change strip disc can grind the mined ore to make its particle size meet the requirements of mineral processing technology, which is convenient for subsequent mineral processing and separation operations.
Building Materials Production Industry
In the building materials production industry, quick change strip disc can grind raw materials such as limestone and clay into powder of a specific fineness for the production of cement, concrete and other building materials.
packing
Quick change strip discs are usually shipped in bulk, depending on the order size. They may be packaged in cardboard boxes or polybags, depending on the manufacturer's preference.
Contact Us
【Company Advantages】
Professional Team
We have more than 40 years of experience in the production of stone grinding equipment. We currently have more than 50 employees, including 2 professional technical R&D personnel and 6 professional technicians.
Strong Production Capacity
We have a 5,000 square meter modern standardized production workshop, fully automatic high-precision molding machines and semi-automatic standardized production lines, with an annual output of up to 50 million pieces.
Strict Quality Management
Our company's abrasive products are all made of high-quality raw materials, and each product is quality tested before leaving the factory to ensure that the product quality meets the EU export standards.
24-hour Service
We have a dedicated service team, and the service staff will provide you with timely feedback from consultation, order follow-up to after-sales, so that you can keep abreast of the latest status of production and delivery.
【Frequently Asked Questions】
Q: What is the main purpose of quick change strip disc?
Quick change strip disc is mainly used for grinding, polishing and finishing of hard materials such as metal and stone.
Q: How to extend the service life of quick change strip disc?
In the process of using quick change strip disc, overload and overheating should be avoided; after use, it should be cleaned and properly stored in time to prevent moisture and collision.
Q: In which industries is quick change strip disc widely used?
Quick change strip disc is widely used in many industries such as machinery manufacturing, stone processing, and automobile manufacturing.
Q: How to deal with quick change strip disc after wear?
After quick change strip disc is worn, it can be repaired or replaced according to the degree of wear. For slightly worn grinding discs, it can be repaired by dressing tools; for severely worn grinding discs, it should be replaced in time to avoid affecting the processing quality and efficiency.
Q: What are the possible faults of quick change strip disc in use?
The possible faults of quick change strip disc in use include grinding disc breakage, uneven wear, excessive vibration, etc.
Q: How to judge whether the quick change strip disc needs to be replaced?
Observe the wear of the quick change strip disc surface. If there are obvious scratches, grooves or the thickness of the grinding disc becomes thinner to a certain extent, it means that it needs to be replaced. Poor grinding effect, such as insufficient grinding of materials and uneven particle size, also indicates that the performance of the grinding disc has declined. In addition, abnormal vibration or noise during equipment operation may be caused by uneven wear of the grinding disc, and replacement should also be considered at this time.
Q: How to ensure safety during the replacement of the quick change strip disc?
Turn off the power of the equipment and lock it to prevent accidental startup. Wear personal protective equipment such as gloves and goggles to avoid hand injuries and foreign objects entering the eyes. During the removal and installation of the quick change strip disc, be careful to prevent tools from slipping and injuring people. For heavier grinding discs, use appropriate lifting equipment and ensure that the lifting equipment is stable and reliable to prevent accidents caused by the grinding disc falling.,
Q: What aspects need to be checked before installing a new quick change strip disc?
Check whether the appearance of the quick change strip disc has defects such as damage and cracks, and ensure that the surface is flat and smooth. Measure the size of the grinding disc, including diameter, thickness, etc., and compare them with the specifications required by the equipment to ensure accurate size matching. Check whether the material and hardness of the grinding disc meet the standards to avoid affecting the service life and grinding effect due to material problems.
Q: What are the key steps to install a quick change strip disc?
Place the new quick change strip disc steadily in the installation position, ensuring that it is aligned with the connection part of the equipment. Tighten the fixing bolts or nuts preliminarily, but do not tighten them completely to facilitate subsequent adjustments. Install other components connected to the grinding disc, such as drive belts, couplings, etc., and adjust the position and tightness. Finally, use a torque wrench to tighten the bolts in sequence according to the specified torque value to ensure that the grinding disc is firmly installed.
Hot Tags: quick change strip disc, China quick change strip disc manufacturer, suppliers, factory, 12 inch sanding disc, black diamond abrasive products, 3000 sandpaper, 1200 grit sandpaper, hand sanding block, benchmark abrasive