【Product Introduction】
Used rice machinery is based on advanced rice milling technology. Through the rotation and friction of the mechanical drum, it can effectively peel off the rice husk and retain the nutritional content and taste of rice.
【Product Advantages】
Efficient Shelling
The internal shelling device of used rice machinery is made of alloy material with a hardness of up to 700HB. It has a spiral shelling structure, which keeps the shelling success rate stable at more than 96%.
Accurate Screening
The screening system screen of used rice machinery uses high-precision laser drilling technology, and the hole diameter error is within 0.08 mm. It has a multi-stage structure, with 2.2 mm in the first stage, 1.8 mm in the second stage, and 1.2 mm in the third stage, which successively screen out impurities, and the purity of rice reaches 99%.
Stable Operation
The core components of used rice machinery, such as the body frame and the transmission main shaft, are 45# alloy steel, equipped with a 5.5 kW energy-saving three-phase asynchronous motor and a precision gear transmission device, with a transmission efficiency of over 95%, and can work for over 10 hours at full load.
Grinding Coffee And Cocoa
Used rice machinery can grind coffee beans and cocoa beans into very fine powder.
Grinding Grains
Used rice machinery can be used to grind a variety of grains, such as wheat, sorghum, oats, barley, corn, sesame, etc.
Grinding Chemicals
In addition to food raw materials, used rice machinery can also be used to grind some chemicals, including pigments, coatings, plastic raw materials, etc.
| Diameter of stone (cm) | Voltage(v) | Power(kw) | Capacity(kg|h) |
| 60 | 220/380 | 1.5+0.75 | 20 |
| 70 | 220/380 | 1.5+0.75 | 30 |
| 80 | 380 | 2.2+0.75 | 40 |
| 90 | 380 | 3+0.75 | 50 |
| automatic single model 90cm | 380 | 3+0.75+0.75+1.5 | 60 |
| 100 | 380 | 5.5 | 60 |
| automatic single model 100cm | 380 | 5.5+0.75+0.75+1.5 | 75 |
| flour production line | Customized accoding to client requirement | ||
| Packing |
Wooden Case |
| Delivery |
Around 15 days after receive your payment. |
Download
【Company Advantages】
Professional Team
We have more than 40 years of experience in the production of stone grinding equipment. We currently have more than 50 employees, including 2 professional technical R&D personnel and 6 professional technicians.
Strong Production Capacity
We have a 5,000 square meter modern standardized production workshop, fully automatic high-precision molding machines and semi-automatic standardized production lines, with an annual output of up to 50 million pieces.
Strict Quality Management
Our company's abrasive products are all made of high-quality raw materials, and each product is quality tested before leaving the factory to ensure that the product quality meets the EU export standards.
24-hour Service
We have a dedicated service team, and the service staff will provide you with timely feedback from consultation, order follow-up to after-sales, so that you can keep abreast of the latest status of production and delivery.
【Frequently Asked Questions】
Q: How does used rice machinery achieve rice husking?
Used rice machinery uses high-speed rotating parts, such as rubber rollers or iron rollers, to squeeze and rub the rice between two rollers. Taking advantage of the relatively weak bonding between the rice husk and the rice grain, under appropriate pressure and friction, the rice husk breaks and separates from the rice grain, thus completing the husking process. The husked brown rice then enters the subsequent processing link.
Q: How to judge the quality of used rice machinery?
First, check whether the appearance is seriously worn, deformed or rusted. Secondly, listen to the sound during the test run to see if it is stable and without abnormal noise, and check the flexibility of each component. For example, if the transmission part is stuck and the motor is noisy, the quality may be poor.
Q: What daily maintenance does used rice machinery need?
Clean the inside and outside of the used rice machinery on a daily basis to prevent the residual deterioration of rice from affecting the machine. Check the tightness of the transmission belt regularly and adjust it, and add lubricating oil to key parts such as bearings.
Q: Is the operation of used rice machinery complicated?
The operation of used rice machinery is relatively simple. Generally, pour the rice into the feed port, set the processing parameters such as hulling rate, rice milling accuracy, etc., and then start the machine, and the rice will be output from the discharge port.
Q: What safety protection measures does used rice machinery have?
Used rice machinery usually has motor overload protection to prevent excessive current from damaging the motor. The feed port has a protective device to prevent accidental touch by human hands. For example, when the motor is overloaded, the overload protection will automatically cut off the power supply.
Q: Is the used rice machinery noisy during operation?
There will be a certain amount of noise when the used rice machinery is running. The noise level of a small-scale project is relatively low, about 60-70 decibels, similar to the volume of a normal conversation. The noise level of a large-scale commercial project may reach 80-90 decibels, similar to the noisy environment of a workshop. However, the impact of noise on the surrounding environment can be reduced by installing a soundproof enclosure and choosing a suitable venue.
Q: What fine processing can the used rice machinery perform on rice?
The used rice machinery can not only hull the rice, but also whiten the brown rice. By adjusting the pressure in the rice milling chamber and the speed of the roller, the cortex on the surface of the brown rice is removed, making the rice present a crystal clear appearance.
Q: How to debug the used rice machinery before use?
Before use, check whether the connections of the various parts of the used rice machinery are tight and whether the transmission device is flexible. Make a preliminary adjustment to the roller gap and estimate the appropriate gap range according to the characteristics of the rice. Check whether the feed and discharge ports are unobstructed, whether the electrical system is powered normally and the display of each instrument is accurate. Then conduct a no-load test run to observe whether the machine runs smoothly, whether there is any abnormal noise or vibration, and adjust and solve any problems in time.
Hot Tags: used rice machinery for sale, China used rice machinery for sale manufacturer, suppliers, factory, largest flour mill in the world, flour mill plate grinding machine, central milling high mountain, gemini flour mills m sdn bhd, milling of corn, flour mill for home price